Digimerge DND13TL2 Manual de usuario
Busca en linea o descarga Manual de usuario para Cámaras De Seguridad Digimerge DND13TL2. Digimerge Synchro IP Camera brochure Manual de usuario
- Pagina / 2
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Information in this document is subject to change without notice. As our prod-
ucts are subject to continuous improvement, Digimerge Technologies Inc. reserve
the right to modify product design, specifications and prices, without notice and
without incurring any obligation. E&OE © 2012 Digimerge. All rights reserved.
1. RJ45 Network Interface: Connect to a router or
switch on your network using RJ45 Ethernet cable
(Cat5e or better). 100Mhz connection. PoE supported
(class 3 PoE switch required).
2. Audio Input (RCA): Connect to a self-powered
microphone for listen-in audio.
3. Audio Output (RCA): Connect to an amplifier or
self-powered speaker for intercom/2-way audio.
4. DC12V (1A): 12V DC power input terminal. Make
sure to follow correct polarity (+/-) marked on the
power connector. See the instruction manual for your
camera for DC power requirements.
NOTE: See the instruction manual for your camera
for physical installation instructions.
NOTE: Use the included
RJ45 coupler to connect to
male end of RJ45 Ethernet
cable.
CONNECTION
Ethernet
RJ45 (PoE)
Power - DC Audio IN Audio OUT
The camera has the following termination cables:
1
SyncroIP Series Quick Setup Guide - English - R1
Skill Level
Intermediate
easy
advanced
Time
under 30 minutesunder 15 minutes under 60 minutes
Hand Tools Hardware
Router
Hi Speed
over 60 minutes
Skill Level
Intermediate
easy
advanced
Time
under 30 minutesunder 15 minutes under 60 minutes
Hand Tools Hardware
Router
Hi Speed
over 60 minutes
Time: 20 Minutes
Hand Tools Skills - Easy
BASIC INSTALLATION GUIDE
Toll free tech support available
after completing product
registration. For more information
on this product, firmware updates,
warranty and accessory products,
please visit:
www.digimerge.com
!
1
STEP
CONNECTING THE CAMERA OVER THE LAN USING SYNCRO-V
2
STEP
3
STEP
QUICK SETUP GUIDE
SyncroIP
Camera Series
ONVIF COMPATIBILITY AND INCLUDED SOFTWARE
1
The camera includes the following software options:
This camera is ONVIF v2.1 compliant. It is designed for
interoperability with popular VMS’s and NVR’s
*
, with
backwards compatibility to ONVIF v.1.02. For more
information on ONVIF, visit www.onvif.org
Milestone XProtect Go® -- a client/server solution
providing mobile applications and remote access
capabilities. Milestone XProtect® Go supports up to
8 IP cameras. Upgrade options are available from
Milestone.
For Milestone XProtect® Go documentation and
support, visit
www.milestonesys.com/Support-and-Upgrades/
Technical-Support
2
Digimerge CMS-DH PRO -- a client-only solution
with remote viewing capabilities that supports up to
16 IP cameras and analog cameras from Digimerge
Touch Series DVR’s side-by-side via the Virtual DVR
feature. Digimerge CMS-DHS PRO does not support
all the features of the camera, such as microSD/SD
card recording.
See the CMS-DH PRO manual on www.digimerge.com
for instructions.
3
Digimerge Syncro-V -- a client-only solution with
remote viewing capabilities that supports up to
36 IP cameras and supports all the features of the
camera.
This Quick Start Guide provides the initial setup
instructions for accessing your camera using
Digimerge Syncro-V over a LAN and the Internet.
For detailed instructions, see the Syncro-V manual
on the CD.
Install Syncro-V from the CD or from www.digimerge.com
Double-click the Syncro-V icon on the Desktop. The
login screen appears.
1
Under User Name and
Password, enter the default
Syncro-V user name (admin)
and password (admin). Click
Login.
2
Syncro-V opens and scans the local network for connected
cameras. Detected camera IP addresses on the LAN appear in
the Device List. Write down the camera IP address below, you
will need it for remote networking setup.
3
Click on a camera IP address in Device List to login.
4
Under User Name, enter
the user name for the
camera (default: admin).
Under Password, enter the
password for the camera
(default: admin). Click
Continue.
5
The camera appears under
the camera IP address. Click
and drag the camera to the
display grid to open it.
6
USING SYNCRO-V
LOCAL VIEWING INSTALLATION GUIDE
Time: 30 Minutes
Skills - IntermediateHardware
PC/Router
Skill Level
Intermediate
easy
advanced
Time
under 30 minutesunder 15 minutes under 60 minutes
Hand Tools Hardware
Router
Hi Speed
over 60 minutes
Skill Level
Intermediate
easy
advanced
Time
under 30 minutesunder 15 minutes under 60 minutes
Hand Tools Hardware
Router
Hi Speed
over 60 minutes
ATTENTION:
• This guide refers only to the software set-up.
• Broadband Router and Computer are required for local
and remote monitoring (not included).
* See www.digimerge.com for the most updated
list of third party VMS compatibility.
IP ADDRESS: _______._______ ._______._______
Skill Level
Intermediate
easy
advanced
Time
under 30 minutesunder 15 minutes under 60 minutes
Hand Tools Hardware
Router
Hi Speed
over 60 minutes
Skill Level
Intermediate
easy
advanced
Time
under 30 minutesunder 15 minutes under 60 minutes
Hand Tools Hardware
Router
Hi Speed
over 60 minutes
Time: 20 Minutes
Hand Tools Skills - Easy
BASIC INSTALLATION GUIDE
1
Recording & Playback Options: You can record video to the
hard disk on the computer Syncro-V is installed on, a NAS
device, FTP server, or a microSD/SD memory card installed in
the camera. You can also playback video from all the locations
listed above.
See the Syncro-V manual on CD for details on setting up
recording.
2
Digital Zoom: You can zoom in on live video from your cameras.
• To zoom in, click and drag inside the display area.
• To return to default zoom, right-click inside window and click
Restore Panorama.
3
Camera Setup: You can use Syncro-V to configure settings for your
IP cameras, such as the time and date or motion detection.
• To configure settings, click Device Manager > Video Device
Management. Then click the camera you would like to
configure.
Click and drag
NOTE: Provided software is PC compatible only;
Mac OS® access to the cameras is available via
Safari® browser only. See the instruction manual
for details.
1
2
- SyncroIP 1
- HTTP 80 80 2
- 30001 30001 2
Indice de contenidos
Pagina 1 - SyncroIP
Information in this document is subject to change without notice. As our prod-ucts are subject to continuous improvement, Digimerge Techno
Pagina 2 - 30001 30001
SyncroIP Series Quick Setup Guide - English - R14STEPCONNECTING TO THE CAMERA OVER THE INTERNET USING SYNCRO-VCONTD.4DDNS (Dynamic Domain Name System)
Mas documentos para Cámaras De Seguridad Digimerge DND13TL2
Digimerge DND13TL2 Manual de instrucciones
(76 paginas)
Relacionado con productos y manuales para Cámaras De Seguridad Digimerge DND13TL2
(2 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.099 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales