Digimerge DH200 Instrucciones de operaciones descargar pdf (Pagina 23)

Using the System

Setting the Time

It is highly recommended to set the time on the system prior to doing any recording.

NOTE: All recording must be stopped on the system in order to set the time.

To set the date and time:

1. Stop recording on the system by pressing / on

the front panel, or pressing the button

on the remote control and enter your 6-digit system password (by default, 000000).

NOTE: If using the mouse, right-click and then click on the Virtual Remote.

2. Press the MENU

button to open the system menu. Select SYSTEM and press the ENTER

button. The System menu opens.

3. Select the TIM

E tab.

4. Select DA

TE and enter the date (mm/dd/yyyy).

5. Select TIME and

enter the time (hh/mm/ss).

NOTE: If using the mouse, use the Virtual Keyboard to enter the date and time.

6. Press the ENTER

button to save your changes.

7. Press / on the

front panel, or press the button on the remote control to resume

Continuous Recording.

NOTE: If using the mouse, right-click and then click on the Virtual Remote.

Figure 5.0 Time menu

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 163 164

Sin comentarios

Digimerge DH200 Instrucciones de operaciones Pagina 23