Digimerge DH100 Series Manual de instrucciones descargar pdf (Pagina 40)

28

Using the Main Menu

RECORD SETUP

Use the Record menu to configure

system recording settings.

To configure hard drive recording mode:

1. Beside HDD Full drop-down menu, select

Ov

erwrite or Stop.

• Ov

erwrite: When the hard drive is full, the

hard drive will erase the oldest footage, and

begin recording again in a loop (first in first

out).

• Stop: The system stops recording when the

hard drive is full.

OSD Position

To configure the OSD X&Y axis:

1. Beside OSD position

X and OSD position Y,

enter the desired screen co-ordinates.

2. Right-click and click Ye

s to save your

settings.

OSD Position Setup

The OSD position setup allows you to change

where the time and date appears.

To configure the OSD Position:

1. Click the OSD P

osition Setup button.

2. Drag the time/date to the desired location.

3. Right-click to exit. Right-click again and

click Ye

s to save your changes.

Quality & Frame Rate Setup

To adjust the recording quality and frame

rate:

1. Click the Quality

& Frame Rate Setup

button.

2. Configure the following:

• No.: Sel

ect the camera number you wish

to configure.

• View Normal: Select the checkbox to

configure how the system records during

normal recording.

• View Event: Select the checkbox to

configure how the system records during

event recording.

• Resolution: Select recording resolution.

Select from CIF, FIELD, or FRAME.

• Quality: Configure the recording quality.

Select from LOW, MIDDLE, HIGH, SUPER

or ULTRA.

• F/S (frames per second): Select the system

frame rate speed.

• Auto button: Click the Auto button for the

system to optimize the frames allocated to

recording.

3. Right-click and click Ye

s to save your

settings.

Select Overwrite or Stop

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 139 140

Comentarios a estos manuales

Sin comentarios