Digimerge DH100 Series Manual de instrucciones Pagina 93

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 140
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 92
81
Remote Viewing on the Mac
Step 2 of 2: Configure and launch iDVR
1. Double-click the iDVR icon to start the program.
2. Enter the following:
IP:
Enter the local IP address of the DVR or DDNS address in full (i.e.
tomsmith.digimergeddns.net).
Port: Enter the system’s port number.
User Name: Enter the DVR’s user name (by default, admin).
Password: Enter the DVR’s password (by default, 000000).
3. Click Co
nnect. The system connects to your DVR.
NOTE: The
interface and functionality is identical to the local menu.
Enter the DVRs IP address or DDNS address
Enter the DVR port number (default, port 80)
Enter the DVR’s user name (default: admin)
Enter the DVR’s password (default: 000000)
Click the LQ / HQ button to switch between LQ
(low quality) and HQ (high quality) video
streaming
Vista de pagina 92
1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 139 140

Comentarios a estos manuales

Sin comentarios