Digimerge DH100 Series Manual de instrucciones descargar pdf (Pagina 53)

41

Using the Main Menu

USB Initialization

To format a USB drive:

1. Insert a USB drive to the front or rear

panel.

2. Click USB Initiali

zation.

3. Click Ye

s on the warning to format the USB

drive.

4. Wait for a success message, and then

r

emove the USB drive. Right-click to exit.

Factory Default

To restore factory default settings:

1. Click Fa

ctory Default.

2. Click Ye

s on the warning to restore system

defaults.

Reset System Events

To reset System Events:

1. Click Reset System Events button.

2. Click Ye

s on the warning to system events.

Copy Setup to USB

Use the Copy Setup to USB function to copy

your system settings to a USB drive. You can

copy the settings back onto the DVR for later

use.

To copy the system setup settings to the USB:

1. Insert a blank USB key into the front or

r

ear panel of the system.

2. Click Co

py Setup To USB.

3. Click Ye

s on the warning to copy the

settings to your USB key.

Download Setup from USB

After you have copied the system settings to a

USB key, you can download the settings to the

DVR.

To download system settings to your DVR:

1. Insert the USB key that contains the

sys

tem backup settings.

2. Click Downl

oad Setup from USB

3. Click Ye

s to begin copying the settings to

your system.

Upgrading the System

Firmware

To upgrade the system firmware:

1. Download the firmware from

ww

w.digimerge.com from the DH100’s

product page.

2. Copy the firmware to a USB key.

NOTE: Ensure only the firmware is in the

USB key. A firmware file name looks like

this: sdvr11z.fw

3. Insert the USB key to the front or rear

panel of

the system.

4. Click the UPGRADE bu

tton.

5. Select the firmware from the list.

6. Click Ye

s to begin the firmware upgrade.

WARNING: Formatting the USB drive

permanently erases all data.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 139 140

Comentarios a estos manuales

Sin comentarios